Simple, cost-effective solution for ensuring integrity of samples, vaccines and biologics. User-activated indicator designed for use in storage boxes and storage containers.
Once activated, the indicator turns bright pink and stays pink until heat thresholds are met — giving you unmistakable visual confirmation of temperature integrity.
Designed to fit alongside your sample tubes in standard cryo storage boxes, providing continuous at-a-glance monitoring without disrupting your workflow.
Each variant is tuned to a specific signal temperature, the point at which the indicator freezes and stops any color change from occurring. Once samples warm past that point, how quickly the color changes depends on the environment, including packaging, payload size and ambient conditions.
Our most popular product, the Pinktail BX™ 0C is used by researchers, academics and biobanks to ensure sample integrity. Available in multiple run-times at room temperature, the Pinktail BX™ 0C is fast enough to detect dangerous excursions and suitable for samples exposed to multiple freeze-thaw cycles.
Similar to the BX 0C except no color change takes place until temperatures above –18 °C are reached. Useful when monitoring products stored below –20 °C and/or products that go through multiple freeze-thaw cycles. Faster than the BX 0C because the indicator color change starts as soon as temperatures rise above –18 °C.
Part of the deep freeze product collection intended for long-term deep storage applications, ultra-cold sample management and critical cold-chain shipments. The indicator exhibits no color change below –37 °C and remains bright pink for years, then responds quickly once your samples warm past that point.
Part of the deep freeze product collection for long-term deep storage, ultra-cold sample management and critical cold-chain shipments. This is the lowest signal temperature offered, ideal for samples on dry ice or in –80 °C freezers.
Signal temperature is the temperature required for the indicator to freeze and stop any color change from occurring. Use the table below to select the right variant for your storage conditions.
| Storage Temperature | Recommended Products |
|---|---|
| –20 °C |
BX 0C
BX M18C
|
| –40 °C |
BX 0C
BX M18C
BX M37C
|
| –70 °C / –80 °C |
BX M18C
BX M37C
BX M67C
|
| Below –80 °C |
BX M37C
BX M67C
|
Put a Pinktail BX™ indicator inside the box with your samples. It accumulates heat exposure based on both time and temperature and changes color once that exposure reaches its threshold, so a quick look before you use the samples shows whether the box stayed cold. The result is non-reversible, so a box that warmed and was refrozen still shows it.
They answer different questions. A monitoring system watches the freezer air at its probe and alerts you when the freezer is out of range, with alarm delays that filter out routine door openings. Boxes that are pulled often, wait on a cart during inventory or move between freezers absorb heat the freezer record never attributes to them. A Pinktail BX™ in each box records what that box experienced. Freezer monitoring protects the freezer; Pinktail BX verifies the sample. See A Year in the Freezer →
Place the indicator inside the cryobox with the samples. When dry ice runs out, the air in a shipping box warms within minutes while the cryobox lags behind, so a label or data logger in the shipper reports shipper air rather than the samples. A Pinktail BX™ in the cryobox reports what the samples experienced and keeps recording after delivery, through receiving, freezer storage and retrieval. See Inside the Shipper →
If the box holds a Pinktail BX™, check it. Pink means the box did not accumulate enough heat to reach its threshold. A cleared indicator means the box warmed substantially, for example close to thawing, so follow your lab’s procedure before using the samples. See Forgotten on the Bench →
Use an indicator in every box when you need box-level answers at a low cost per box, an instant visual read and monitoring that continues into storage. Add a data logger when you also need a time-stamped record of the journey for lane qualification, quality documentation or carrier claims. A logger tells you what happened to the shipment; Pinktail BX™ tells you what happened to the samples. Read the comparison →
No. Pinktail BX™ variants cover −20 °C and −40 °C storage as well as −80 °C freezers and dry ice. BX 0C and BX M18C suit −20 °C freezers, BX M37C suits −40 °C and colder, and BX M67C suits −80 °C and dry ice. Compare variants →
We’re developing indicators for −130 °C and cryogenic storage, for samples such as vitrified embryos, cell therapies and stem cells held in vapor phase liquid nitrogen. If your team needs sample-level verification at these temperatures, we’d love to hear what you’re working on. Talk to us about −130 °C →
For −20 °C storage, choose BX 0C or BX M18C. For −40 °C storage, BX 0C, BX M18C or BX M37C. For −70 °C to −80 °C storage and dry ice, BX M18C, BX M37C or BX M67C. Below −80 °C, BX M37C or BX M67C. CryoVeritas can also build a custom time and temperature profile for your samples. Request a custom profile →
No. Once activated, Pinktail BX™ accumulates heat exposure and does not reverse, so it keeps a record of every warm-up for as long as the samples are stored. Activated indicators last 2+ years.
Explore guides and documentation to help you get the most out of your Pinktail BX™ indicators.
Watch our step-by-step video walkthrough and learn how to unbox, activate, and deploy your indicators.
View guide →Download the full technical datasheet with detailed specifications, performance data, and ordering information.
Download PDF →Estimate indicator run times at any temperature using our standard formulas. Custom formulas available on request.
Open estimator →See how the cryobox warms at its own pace when dry ice runs out, and why a Pinktail BX™ in the cryobox shows what your samples actually experienced.
Watch the simulation →